Search Results: Planholders

Listing for all primes seeking assistance with project 02-4H3404.

6 records found



Contractor: Tullis, Inc. Contact: Chris Brimhall
Address: 16951 Clear Creek Road Redding, Ca. 96001
Phone: 530-241-5105 Fax: 530-241-5570 Email: cbrimhall@tullisinc.com
Services needed: Tullis, Inc. is accepting bid from qualified Disabled Veteran Business and Small Business Enterprises for the following work; Lead Compliance Plan, Developing Water Supply, Construction Area Signs, Traffic Control System, Portable Radar Feedback Sign System and Message Sign, Automated Flagger Assistance Device, Job Site Management, Preparing Storm Water Polluting Prevention Plan, Preparing Rain Event Action Plan, Preparing Storm Water Annual Report, Temporary Fiber Roll and Gravel Bag Berm, Street Sweeping, Temporary Concrete Washout, Treated Wood Waste, Invasive Species Control, Clearing and Grubbing, Roadway Excavation, Shoulder Backing, Fiber Reinforced Matrix, Rolled Erosion Control Product, Hydromulch, Hydroseed, Hydraulic Biotic Growth Medium, Finishing Roadway, Class 2 Aggregate Base, Hot Mix Asphalt, Placing Hot Mix Asphalt Dike, Tack Coat, Cold Plane Asphalt Concrete Pavement, Rail Element Wall, Structural Concrete Drainage Inlet, Reinforced Concrete Pipe, Corrugated Steel Pipe, Steel Flared End Section, Concrete Flared End Section, Removing Culvert, Removing Inlet, Remove Headwall, Rock Slope Protection, Miscellaneous Iron and Steel, Delineator, Pavement Markers, Object Markers, Removing Markers, Removing Roadside Sign, Relocating Roadside Signs, Furnish Single Sheet Sign, Roadside Signs, Midwest Guardrail System, Vegetation Control, End Anchor Assembly, Alternative In-Line Terminal System, Placing Thermoplastic Pavement Markings, Placing Thermoplastic Traffic Stripe, Removing Thermoplastic Pavement Markings, Quality Control Testing, Trucking, and Water Trucks, Not Limited To The Above Listed Items.
Requirements: The plans and specifications, for the referenced project, can be reviewed at our office or downloaded in electronic format at http://ppmoe.dot.ca.gov/des/oe/weekly-ads/oe-project.php?q=02-4H3404. Tullis, Inc. is signatory to the Operating Engineers and Laborers Unions. Subcontractors must possess a current contractor’s license, insurance coverage and worker’s compensation for the entire length of the contract. At Tullis, Inc.’s discretion, 100% payment and performance bonds may be required. If you require assistance in obtaining bonding, lines of credit, insurance, equipment, supplies, materials, or have any questions related to the referenced project, please contact or office at (530) 241-5105. Tullis, Inc. is an Equal Opportunity Employer and will consider any and all bids that may be submitted. Tullis, Inc. is willing to breakout any portion of work to encourage DVBE and SBE participation. If you should have any interest in this project or require any assistance, please contact Tullis, Inc. and we can discuss the project in length and how you may be able to participate.
Date posted: 03/31/2021
Contractor: R. Brown Construction Company, Inc. Contact: Roger Brown
Address: P.O. Box 406 or 18 China Creek Rd. Willow Creek, CA 95573
Phone: 530-629-3702 Fax: 530-629-2863 Email: rbrown@rbrownconstruction.net
Services needed: R. Brown Construction Company Inc. is requesting quotes from all qualified Subcontractors and Suppliers including certified DVBE firms for the following items of work, including but not limited to: Lead Compliance Plan, Time-Related Overhead (WDAY), Develop Water Supply, Construction Area Signs, Traffic Control System, Portable Changeable Message Sign (LS), Portable Radar Speed Feedback Sign System (LS), Automated Flagger Assistance Device Day, Job Site Management, Prepare Storm Water Pollution Prevention Plan, Rain Event Action Plan, Storm Water Annual Report, Temporary Fiber Roll, Temporary Gravel Bag Berm, Temporary Construction Entrance, Street Sweeping, Temporary Concrete Washout, Treated wood waste, Invasive Species Control, Clearing and Grubbing (LS), Roadway Excavation, Shoulder Backing, Fiber Reinforced Matrix, Rolled Erosion Control Product (Netting), Hydromulch, Hydroseed, Hydraulic Biotic Growth Medium, Finishing Roadway, Class 2 Aggregate Base (CY), Hot Mix Asphalt (Type A), Place Hot Mix Asphalt (Miscellaneous Area), Tack Coat, Cold Plane Asphalt Concrete Pavement, Rail Element Wall, Structural Concrete, Drainage Inlet, 24” Reinforced Concrete Pipe, 24” Steel Flared End Section, 24” Corrugated Steel Pipe (.109” Thick), Remove Culvert (LF), Remove Inlet, Remove Headwall, Rock Slope Protection (20 LB, Class I, Method B)(CY), Miscellaneous Iron and Steel, Delineator (Class 2), Pavement Marker (Retroreflective Recessed), Marker (Culvert), Object Marker (Type L-1), Remove Marker, Remove Roadside Sign, Relocate Roadside Sign-One Post, Furnish Single Sheet Aluminum Sign (0.080” Unframed), Furnish Single Sheet Aluminum Sign (0.080” Framed), Roadside Sign- One Post, Roadside Sign- Two Post, Midwest Guardrail System (Steel Post), Vegetation Control (Minor Concrete), End Anchor Assembly (Type SFT), Alternative In-Line Terminal System, Thermoplastic Pavement Marking, Thermoplastic Traffic Stripe (Sprayable), Remove Thermoplastic Pavement Marking, Mobilization. R. Brown Construction Company Inc. will work with interested subcontractors to identify opportunities to break down items into economically feasible packages.
Requirements: Subcontractors must possess a current contractor’s license (please include your license number & CA DIR registration number on your quote), worker’s compensation and insurance coverage during the entire length of this contract. 100% Performance and Payment Bonds may be required. Conditions or exceptions in Subcontractor’s quote are expressly rejected unless accepted in writing. All Subcontractors will be required to sign R. Brown Construction Company Inc.’s standard Subcontract Agreement. Plans and specifications are available for viewing at our office or you may call R. Brown Construction Company Inc. for further assistance. Subcontractor and Supplier quotes are required 24 hours prior to the bid date to enable thorough evaluation. Please call if assistance is needed in obtaining bonding, insurance, equipment, materials, and supplies. R. Brown Construction Company Inc. In an equal opportunity employer and intends to work cooperatively with all qualified firms seeking work on this project.
Date posted: 04/01/2021
Contractor: R. Brown Construction Company, Inc. Contact: Roger Brown
Address: P.O. Box 406 or 18 China Creek Rd. Willow Creek, CA 95573
Phone: 530-629-3702 Fax: 530-629-2863 Email: rbrown@rbrownconstruction.net
Services needed: R. Brown Construction Company Inc. is requesting quotes from all qualified Subcontractors and Suppliers including certified DVBE firms for the following items of work, including but not limited to: Lead Compliance Plan, Time-Related Overhead (WDAY), Develop Water Supply, Construction Area Signs, Traffic Control System, Portable Changeable Message Sign (LS), Portable Radar Speed Feedback Sign System (LS), Automated Flagger Assistance Device Day, Job Site Management, Prepare Storm Water Pollution Prevention Plan, Rain Event Action Plan, Storm Water Annual Report, Temporary Fiber Roll, Temporary Gravel Bag Berm, Temporary Construction Entrance, Street Sweeping, Temporary Concrete Washout, Treated wood waste, Invasive Species Control, Clearing and Grubbing (LS), Roadway Excavation, Shoulder Backing, Fiber Reinforced Matrix, Rolled Erosion Control Product (Netting), Hydromulch, Hydroseed, Hydraulic Biotic Growth Medium, Finishing Roadway, Class 2 Aggregate Base (CY), Hot Mix Asphalt (Type A), Place Hot Mix Asphalt (Miscellaneous Area), Tack Coat, Cold Plane Asphalt Concrete Pavement, Rail Element Wall, Structural Concrete, Drainage Inlet, 24” Reinforced Concrete Pipe, 24” Steel Flared End Section, 24” Corrugated Steel Pipe (.109” Thick), Remove Culvert (LF), Remove Inlet, Remove Headwall, Rock Slope Protection (20 LB, Class I, Method B)(CY), Miscellaneous Iron and Steel, Delineator (Class 2), Pavement Marker (Retroreflective Recessed), Marker (Culvert), Object Marker (Type L-1), Remove Marker, Remove Roadside Sign, Relocate Roadside Sign-One Post, Furnish Single Sheet Aluminum Sign (0.080” Unframed), Furnish Single Sheet Aluminum Sign (0.080” Framed), Roadside Sign- One Post, Roadside Sign- Two Post, Midwest Guardrail System (Steel Post), Vegetation Control (Minor Concrete), End Anchor Assembly (Type SFT), Alternative In-Line Terminal System, Thermoplastic Pavement Marking, Thermoplastic Traffic Stripe (Sprayable), Remove Thermoplastic Pavement Marking, Mobilization. R. Brown Construction Company Inc. will work with interested subcontractors to identify opportunities to break down items into economically feasible packages.
Requirements: Subcontractors must possess a current contractor’s license (please include your license number & CA DIR registration number on your quote), worker’s compensation and insurance coverage during the entire length of this contract. 100% Performance and Payment Bonds may be required. Conditions or exceptions in Subcontractor’s quote are expressly rejected unless accepted in writing. All Subcontractors will be required to sign R. Brown Construction Company Inc.’s standard Subcontract Agreement. Plans and specifications are available for viewing at our office or you may call R. Brown Construction Company Inc. for further assistance. Subcontractor and Supplier quotes are required 24 hours prior to the bid date to enable thorough evaluation. Please call if assistance is needed in obtaining bonding, insurance, equipment, materials, and supplies. R. Brown Construction Company Inc. In an equal opportunity employer and intends to work cooperatively with all qualified firms seeking work on this project.
Date posted: 04/01/2021
Contractor: Stimpel-Wiebelhaus Associates, Inc Contact: Marshall Harmon
Address: 1168 Industrial St. Redding, CA, 96002
Phone: 530-356-4454 Fax: 530-223-3879 Email: marshall@stimpel.net
Services needed: SWA is seeking bids from qualified subcontractors and suppliers for the following items: LEAD COMPLIANCE PLAN, TIME-RELATED OVERHEAD, DEVELOP WATER SUPPLY, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, PORTABLE RADAR SPEED FEEDBACK SIGN, PORTABLE CHANEABLE MESSAGE SIGN, AUTOMATED FLAGGER ASSISTANCE DEVICE, JOB SITE MANAGEMENT, PREPARE SWPPP, REAP, STORM WATER ANNIAL REPORT, TEMPORARY FIBER ROLL, TEMPORART GRABEL BAG BERM, TEMPORARY CONSTRUCTION ENTRANCE, STRTEET SWEEPING, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, INVASIVE SPECIES CONTROL, CLEARING AND GRUBBING, ROADWAY EXCAVATION, SHOULDER BACKING, FIBER REINFORCED MATRIX, ROLLED EROASION CONTROL PRODUCT, HYDROMULCH, HYDROSEED, HYDRAULIC BIOTIC GROWTH MEDIUM, FINISHING ROADWAY, CLASS 2 AGGREGATE BASE, HOT MIX ASPHATL, PLACE HMA DIKE (TYPE A), PLACE HMA (MISC AREA), TACK COAT, COLD PLANE ASPHALT CONCRETE PAVEMENT, RAIL ELEMENT WALL, STRUCTURAL CONCRETE, DRAINAGE INLET, 24" REINFORCED CONCRETE PIPE, 24" CORRUGATED STEEL PIPE, 24" STEEL FLARED END SECTION, 24" CONCRETE FLARED END SECTION, REMOVE CULVERT, REMOVE INLET, REMOVE HEADWALL, RSP (20 LB, CLASS I, METHOD B), MISC IRON AND STEEL, DELINEATOR, PAVEMENT MARKER (RETROREFLECTIV-RECESSED), MARKER (CULVERT), OBJECT MARKER (TYPE L-1), REMOVE MARKER, REMOVE ROADSIDE SIGN, RELOCATE ROADSIDE SIGN-ONE POST, FURNISH SINGLE SHEET ALUMINUM SIGN, ROADSIDE SIGN-ONE AND TWO POST, MIDWEST GUARDRAIL SYSTEM (STEEL POST), VEGETATION CONTROL (MINOR CONCRETE), END ANCHOR ASSEMBLY (TYPE SFT), ALTERNATIVE IN-LINE TERMINAL SYSTEM, THERMOPLASTIC PAVEMENT MARKING AND TRAFFIC STRIPE, REMOVE THERMOPLASTIC PAVEMENT MARKING.
Requirements: STIMPEL-WIEBELHAUS ASSOCIATES, INC. (SWA) WILL WORK WITH INTERESTED SUBCONTRACTORS TO IDENTIFY OPPORTUNITIES TO BREAK DOWN ITEMS INTO ECONOMICALLY FEASIBLE PACKAGES TO ENCOURAGE MINORITY CONTRACTOR PARTICIPATION. SWA IS A UNION SIGNATORY CONTRACTOR AND SUBS SHALL BE REQUIRED TO BE OR TO SIGN AN APPROVED ONE TIME TERMS/CONDITIONS AGREEMENT PLANS AND SPECIFICATIONS ARE AVAILABLE FOR VIEWING AT OUR OFFICE OR CAN BE DOWNLOADED FROM THE OWNERS WEBSITE. PLEASE CONTACT SWA FOR ANY FUTHER ASSISTANCE AND IF ANY HELP IS NEEDDED IN OBTAINING BONDING, INSURANCE, EQUIPMENT, MATERIALS, OR SUPPLIES SWA INTENDS TO WORK COOPERATIVELY WITH ALL QUALIFIED FIRMS SEEKING TO WORK ON THIS PROJECT. WE ARE AN EQUAL OPPORTUNITY EMPLOYER AND WILL CONSIDER ANY AND ALL BIDS THAT MAY BE SUBMITTED
Date posted: 04/02/2021
Contractor: Steelhead Constructors JV Contact: Kelly Knight
Address: 2940 Innsbruck Drive Redding
Phone: 530-226-6400 Fax: 530-226-6401 Email: kelly@steelheadconstructors.com
Services needed: We are requesting quotes from all qualified subcontractors and suppliers, including all certified DVBE/DBE/MBE/WBE/MB subcontractors. We are soliciting quotes for (including but not limited to): LEAD COMPLIANCE PLAN, TIME-RELATED OVERHEAD (WDAY), DEVELOP WATER SUPPLY, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, PORTABLE RADAR SPEED FEEDBACK SIGN SYSTEMS, PORTABLE CHANGEABLE MESSAGE SIGN, AUTOMATED FLAGGER ASSISTANCE DEVICE DAY, JOB SITE MANAGEMENT, PREPARE STORM WATER POLLUTION PREVENTION PLAN, RAIN EVENT ACTION PLAN, STORM WATER ANNUAL REPORT, TEMPORARY FIBER ROLL, TEMPORARY GRAVEL BAG BERM, TEMPORARY CONSTRUCTION ENTRANCE, STREET SWEEPING, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, INVASIVE SPECIES CONTROL, CLEARING AND GRUBBING, ROADWAY EXCAVATION, SHOULDER BACKING, FIBER REINFORCED MATRIX, ROLLED EROSION CONTROL PRODUCT (NETTING), HYDROMULCH, HYDROSEED, HYDRAULIC BIOTIC GROWTH MEDIUM, FINISHING ROADWAY, CLASS 2 AGGREGATE BASEHOT MIX ASPHALT (TYPE A)TON, PLACE HOT MIX ASPHALT DIKE (TYPE A), PLACE HOT MIX ASPHALT (MISCELLANEOUS AREA), TACK COAT, COLD PLANE ASPHALT CONCRETE PAVEMENT, RAIL ELEMENT WALL, STRUCTURAL CONCRETE, DRAINAGE INLET, 24" REINFORCED CONCRETE PIPE, 24" CORRUGATED STEEL PIPE (.109" THICK), 24" STEEL FLARED END SECTIION, 24" CONCRETE FLARED END SECTION, REMOVE CULVERT, REMOVE INLET, REMOVE HEADWALL, ROCK SLOPE PROTECTION (20 LB, CLASS I, METHOD B), MISCELLANEOUS IRON AND STEEL, DELINEATOR (CLASS 2), PAVEMENT MARKER (RETROREFLECTIVE-RECESSED), MARKER (CULVERT), OBJECT MARKER (TYPE L-1), REMOVE MARKER, REMOVE ROADSIDE SIGN, RELOCATE ROADSIDE SIGN-ONE POST, FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-UNFRAMED), FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-FRAMED), ROADSIDE SIGN - ONE POST, ROADSIDE SIGN - TWO POST, MIDWEST GUARDRAIL SYSTEM (STEEL POST),VEGETATION CONTROL (MINOR CONCETE), END ANCHOR ASSEMBLY, ALTERNATIVE IN-LINE TERMINAL SYSTEMEA161840515THERMOPLASTIC PAVEMENT MARKINGSQFT1THERMOPLASTIC TRAFFIC STRIPE (SPRAYABLE), REMOVE THERMOPLASTIC PAVEMENT MARKINGS. Steelhead will work with suppliers and subcontractors to identify opportunities and break down items into economically feasible units.
Requirements: Steelhead Constructors JV (Steelhead) will be bidding the referenced project as a prime contractor. Plans and specifications for this project may be viewed at the Caltrans Website, where you Opted-In, at your local builder’s exchange and are available for review in our office. If you require additional information regarding the requirements of the contract, please don’t hesitate to call our office. In order that we may give your bid maximum consideration, please supply us with an email prior to the bid date describing the scope of your work. We are requesting quotes from all qualified subcontractors and suppliers, including all certified Steelhead is an Equal Employment Opportunity Employer. We encourage and actively solicit proposals from DVBE, DBE, MBE, WBE, DBE and MB subcontractors and suppliers on all our projects. All qualified DVBE, DBE, MBE, WBE, and MB subcontractors must be registered and certified by the California Department of Transportation. Steelhead is signatory to Operating Engineers, Laborers, Carpenters and Cement Masons Unions. All subcontractors must possess a current contractor’s license, insurance, and workers’ compensation coverage meeting Steelhead’s requirements and will be required to sign Steelhead’s Subcontract Agreement. Performance and payment bonds up to 100% may be required for the full amount of the subcontract price. Prior to the bid, upon request, you can contact our office if you require assistance in bonding, lines of credit, insurance, obtaining necessary equipment, supplies, materials or services, establishing delivery schedules, etc., which may be required by the Owner. Please contact our office and advise us if you are interested in this project. When submitting any bid on a public works project, please prominently include, on your quote, your California Contractors License Number and Department of Industrial Relations Number. More information regarding California Contractors License and DIR Numbers can be found at http://www.cslb.ca.gov/ and http://www.dir.ca.gov/Public-Works/PublicWorks.html Sincerely, STEELHEAD CONSTRUCTORS JV Kelly Knight The Estimating Department 530-226-6400 ask for Kelly Knight. Please email quotes to estimating@steelheadconstructors.com
Date posted: 04/12/2021
Contractor: Mercer-Fraser Company Contact: Cassie Coppini
Address: PO Box 1006 Eureka, CA 95502
Phone: 707-443-6371 Fax: 707-443-0277 Email: ccoppini@mercerfraser.com
Services needed: LEAD COMPLIANCE PLAN DEVELOP WATER SUPPLY CONSTRUCTION AREA SIGNS TRAFFIC CONTROL SYSTEM PORTABLE RADAR SPEED FEEDBACK SIGN SYSTEMS PORTABLE CHANGEABLE MESSAGE SIGN AUTOMATED FLAGGER ASSISTANCE DEVICE DAY JOB SITE MANAGEMENT PREPARE STORM WATER POLLUTION PREVENTION PLAN RAIN EVENT ACTION PLAN STORM WATER ANNUAL REPORT TEMPORARY FIBER ROLL TEMPORARY GRAVEL BAG BERM TEMPORARY CONSTRUCTION ENTRANCE STREET SWEEPING TEMPORARY CONCRETE WASHOUT TREATED WOOD WASTE INVASIVE SPECIES CONTROL CLEARING AND GRUBBING ROADWAY EXCAVATION SHOULDER BACKING FIBER REINFORCED MATRIX ROLLED EROSION CONTROL PRODUCT (NETTING) HYDROMULCH HYDROSEED HYDRAULIC BIOTIC GROWTH MEDIUM FINISHING ROADWAY CLASS 2 AGGREGATE BASE HOT MIX ASPHALT (TYPE A) PLACE HOT MIX ASPHALT DIKE (TYPE A) PLACE HOT MIX ASPHALT (MISC AREA) TACK COAT COLD PLANE ASPHALT CONCRETE PAVEMENT RAIL ELEMENT WALL STRUCTURAL CONCRETE, DRAINAGE INLET 24" REINFORCED CONCRETE PIPE 24" CORRUGATED STEEL PIPE (.109" THICK) 24" STEEL FLARED END SECTION 24" CONCRETE FLARED END SECTION REMOVE CULVERT REMOVE INLET REMOVE HEADWALL ROCK SLOPE PROTECTION (20 LB, CLASS I, METHOD B) MISCELLANEOUS IRON AND STEEL DELINEATOR (CLASS 2) PAVEMENT MARKER (RETROREFLECTIVE-RECESSED) MARKER (CULVERT) OBJECT MARKER (TYPE L-1) REMOVE MARKER REMOVE ROADSIDE SIGN RELOCATE ROADSIDE SIGN-ONE POST FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-UNFRAMED) FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-FRAMED) ROADSIDE SIGN - ONE POST ROADSIDE SIGN - TWO POST MIDWEST GUARDRAIL SYSTEM (STEEL POST) VEGETATION CONTROL (MINOR CONCRETE) END ANCHOR ASSEMBLY (TYPE SFT) ALTERNATIVE IN-LINE TERMINAL SYSTEM THERMOPLASTIC PAVEMENT MARKING THERMOPLASTIC TRAFFIC STRIPE (SPRAYABLE) REMOVE THERMOPLASTIC PAVEMENT MARKING
Requirements: Mercer-Fraser Company is an Equal Opportunity Employer and is signatory with the Operating Engineers, Laborers, Carpenters and Teamsters Unions. Plans and specifications for this project are available to review upon request, or on the Caltrans Website. Mercer-Fraser Company will negotiate in Good Faith with all prospective subcontractors and suppliers for this project. Assistance may be provided to obtain bonding, lines of credit, insurance, necessary equipment, supplies and materials. Mercer-Fraser Company will break up items into economically feasible packages to encourage minority participation. Scope letters (including subcontractor conditions or exceptions) should be received 24 hours prior to bid time to allow for proper evaluation and review. 100% performance and payment bonds may be required for the full amount of subcontract price by an admitted surety and subject to approval by Mercer-Fraser Company. Mercer-Fraser Company will pay for bond premium up to 1.5%. Subcontractors must possess a current applicable Contractors license, DIR number, insurance and workers compensation coverage meeting Mercer-Fraser Company and Caltrans minimum requirements during the entire length on the contract, and will be required to sign the standard Mercer-Fraser Company Subcontract Agreement and provide a waiver of subrogation. A copy of the insurance requirements and subcontract agreement can be obtained by contacting our office.
Date posted: 04/15/2021